|
Farouk CHI Turbo Flat Irons Tips
Here are a few tips to help ensure the best results and long
life with you CHI Iron
-
The CHI Flat Iron has been
designed with an IDCI plug. This helps to prevent electric
shocks. If the CHI Iron does not turn on when the switch
is turned to the on position, be sure that the red reset
button on the plug is depressed. In the case of local
electrical interruptions, be sure to reset the plug before
using again.
-
The CHI Flat Iron is turned on
and off by sliding the concealed switch inside the handle.
The red indicator light will tell you when the Iron is in
the heating mode. This light may flicker during heat
cycles. Always turn the CHI Iron off when not in use.
-
The ceramic paddles may be
cleaned of product build-up using rubbing alcohol and a
clean cloth. Be sure that the Chi
Iron is turned off,
unplugged, and cool to the touch before cleaning. Do not
use abrasive cleansers or materials on the ceramic plates,
as this will damage the heating surface.
-
As with any electrical
appliance, keep the CHI Iron away from water. Never
submerge the CHI Iron in water as it will damage the Iron
and void the warranty.
-
Should the hinge mechanism
become loose and the plates fail to align properly, the
hinge may be tightened. Unplug the Iron and allow to cool.
Carefully remove the caps covering the hinge. Tighten the
screw inside the hinge until the plates align. Replace the
hinge covers, and return to normal usage.
CHI iron tips
CHI Turbo Flat Irons
Tips
Check price
|
